PAJARI

 INSTRUMENTS LTD

Directional Surveying

Instrumentation and Accessories

Home   |    Sitemap    |    Contact Us


4About Us 4Our Products 4Information Menu 4Survey Trains 4Price Quotes

Tropari


Introduction

Applications

General Information

4English 4Français

Specifications

4English 4Français  

Surveying Methods

Overview

Wireline

Inner Tube Sub

 = Accessories

Landing Coupling

Wireline Surveying Instructions

(picture by picture)

Open Hole

Cable Lowering

 = Accessories

Rod Lowering

Operating Instructions

4English 4Français

Setting Time

4English 4Français

Reading the Results

4English 4Français  

Tropari Help

Parts Catalogue

Shock Damage

Water Damage

Desiccant Container

Checking Sensitivity

Container Maintenance

.


4e-SYNC 4Core Goniometer 4Quik Connect  


TROPARI - Setting Time

Click here for printable version in pdf formatPrint


Using the index finger and thumb of the right hand, gently move the knurled timing ring so that the setting mark on the ring turns to the left.

Topari - Setting Time (figure 1)


A side view of the inner frame showing the distinctive 5 and 10 minute timing marks on a model 201 Tropari.  The model 211 Tropari has only 10 minute marks. Single dots on the scale represent 30 minute intervals - double dots 60 minutes.

Topari - Setting Time (figure2)


Timing the Tropari - Remember that the last ten minutes of the time set on the TROPARI  is  utilized for the locking cycle. If you have not reached your survey depth when only ten minutes are left, the survey will not give meaningful results if you continue to lower.

Topari - Setting Time (figure 3)

 

 
© Pajari Instruments Ltd. 2008
sales@pajari.com - www.pajari.com