e-SYNC - Operating Instructions - Instrument Flash Legend

Introduction

Specifications

Instrument Window Info

Wireless Antenna Port

Adding Survey Information

Operating Instructions

Single Shot Automatic

Single Shot Timed

Multi Shot Timed

Realtime

Working with Stored Data

View Previous Data

Building Output File

Administrative Options.

Applications

Overshot

Core Orientation

Open Hole

A - On/Off Switch B - Cable/Recharge Port C - Instrument Window

The green light that appears in the instrument window not only tells you that the power to the instrument has been turned on, but also has a distinctive flash sequence for each mode the instrument is in.

Below you will see simulations of the 5 different e-SYNC flash sequences with a description for each.

Sequence # 1 - Instrument on.
		This flashing sequence tells you that the power to the e-SYNC has been turned on. - Light off - followed by 2 flashes. - (off - on - on)
A - On/Off Switch B - Cable/Recharge Port C - Instrument Window
Sequence # 2 - Instrument processing instructions.
		This flashing sequence tells you that the e-SYNC has received instructions from the handheld and is now executing these instructions. - Steady fast flashing. - (on - off - on - off)
A - On/Off Switch B - Cable/Recharge Port C - Instrument Window
Sequence # 3 - Taking a survey.
		A solid green light tells you that the e-SYNC is taking a survey. - Light on
A - On/Off Switch B - Cable/Recharge Port C - Instrument Window
Sequence # 4 - Survey waiting for download.
		This flashing sequence tells you there is a survey in the e-SYNC waiting to be downloaded. - Light on - followed by 2 flashes. - (on - off - off)
A - On/Off Switch B - Cable/Recharge Port C - Instrument Window
Sequence # 5 - Realtime Mode.
		This flashing sequence tells you there the e-SYNC is in Realtime mode. - Steady slow flashing. - (on - off - on - off)
A - On/Off Switch B - Cable/Recharge Port C - Instrument Window