PAJARI

 INSTRUMENTS LTD

Directional Surveying

Instrumentation and Accessories

Home   |    Sitemap    |    Contact Us

Screen by Screen   -   Text Format

A - On/Off switch   B - Cable/Recharge Port   C - Instrument Window   D - Wireless Antenna

The handheld computer has a touch sensitive screen with large, user friendly buttons and text to guide you through the commands required to start and download a survey.  

Communication between the e-SYNC and handheld computer is through wireless “Bluetooth” technology.

When taking a survey, the e-SYNC automatically records the date and time of each survey. After downloading, this information is then stored in the handheld computer for future reference.

Once the survey results are in the handheld computer an export file can be created to view the survey log on other computers.

Once set to take a survey, the handheld will provide you with “countdown” and “information” screens - now you can follow the survey process step by step.

After downloading your survey results to the handheld computer, you can add additional information to each survey record such as location, depth of hole, operator and any notes you would like to be kept with that particular survey.

top

Turn on the e-SYNC by turning the on/off switch ( A ) (Figure 1) clockwise with the standard screw driver provided.

Figure 1

   A - On/Off switch

   B - Cable/Recharge Port

   C - Instrument Window

Figure 2

Turn on the handheld computer.

Press: Start - File explorer - SD Card - Pajari - e-SYNC

Screen Info: – Initializing . . .

This screen gives you 3 options:

1. Start Advanced

2. Start Simple

3. Close Program

Press the “Start Advanced” button

This brings you to:

Screen 2 – Connect to / Options Screen

This screen gives you 5 options  

Connect to Instrument via:

1. Wireless

2. Cable

3. Work with Stored Data

4. System Settings

5. Back

Press the “System Settings" button

This brings you to: 

Screen 32 – Survey Mode Menu

This screen lists the 4 survey modes available.

This screen also gives you 3 options

1. Adjust the time settings.

2. Change the backlight settings of the handheld.

3. Done will return you to the previous screen.

Select “Single Shot Automatic”

Press the “Adjust Timings” button

This brings you to:

Screen 35 - Single Shot Automatic - "Check Settings"

This screen shows you the current delay time setting before the instrument is active, and gives you a button to press to change this time.

Press the “Change” button

This brings you to:

Screen 36 – Single Shot Automatic – “Change settings”

Pressing the “+” and “-” buttons allows you to set the delay time before deployment. In automatic mode the e-SYNC will take a reading after it has stopped and has not moved for 20 seconds. This setting is the time it takes you to attach the e-SYNC to the survey train and to start it moving in the hole.

The “Done” button will return you to the previous screen.

Calculate the time required before the e-SYNC starts moving to the survey location and set this amount of time.

Press the “Done” button

This brings you to:

Screen 35 – Single Shot Automatic – “Check settings”

Any changes made to the delay time are now shown here.

If the time is not what you want, simply press the change button again and reset the time.

Press the “Done” button  

This returns you to:

Screen 32 – Survey Mode Menu

Press the “Done” button  

This returns you to:

Screen 2 – Connect to / Options Screen

This screen gives you 5 options  

Connect to Instrument via:

1. Wireless

2. Cable

3. Work with Stored Data

4. System Settings

5. Back

Press the “Wireless” button

Screen Info: Please wait… 

This brings you to:

Screen 3 – Instrument Action

This screen gives you 4 options

1. System Test

2. Start Survey

3. Download Survey

4. Back

Press the “Start Survey” button

Screen info: Please wait… 

Screen info

changes to:

Before each survey is taken, a system test is automatically performed.

Pressing the “Start Survey” button when there is a previous survey waiting to be downloaded will return the following messages:

Screen info: “Please wait… “

Screen info: “There is a Survey Ready in the e-SYNC.

Please download before starting a new survey”

Press the OK button to return to: Screen 3 - Instrument Action to download the survey.

Pressing the “Download Survey” button when no survey has been taken will return the following message:

Screen info: “Please wait… “

Screen info:  “No survey ready for download in the e-SYNC.

Please record a survey first, then attempt download again”.

Press the “OK” button to return to: Screen 3 - Instrument Action

Pressing the “Back” button takes you to:

Screen 2 - Connect to / Options Screen

This brings you to:

Screen 4 - System Test

A system test, checks the battery levels of the handheld, the e-SYNC and also checks the electronic sensors inside the e-SYNC to be sure everything is OK before you take the survey. If the test should fail it will be repeated up to two more times. If the battery levels are low a warning screen will appear. 

Press the “Done” button  

This will bring you to:

Screen 31 – Confirm Settings: Single Shot Automatic

This screen shows you the delay time before the survey will be taken.

Pressing the “Start Survey” button will begin the survey.

Pressing the "Change" button will repeat the steps from above to change the delay time.

Press the “Start Survey” button

Screen info: Instructing e-SYNC

If a problem occurs this message will appear.

This brings you to:

Screen 6 - Time before Instrument is Active countdown screen.

Screen Info: Informs you the time before the instrument starts checking to see if it is stopped.

Move Instrument into position

When the countdown timer reaches 0 the screen will change to:

The e-SYNC is now active and it begins to check if it is moving or not.

It now needs to be moving toward the survey location or it could possibly take a reading.

Screen info:

The e-SYNC is now "ACTIVE". To take a survey stop and keep the e-SYNC still for 30 seconds. 

This brings you back to:

Screen 3 - Instrument Action Screen  

Pressing the Download survey button will retrieve the readings from the e-SYNC.

Press the “Download Survey” button

Screen info

changes to:

This brings you to:

Screen 8 - Survey Results Screen

This screen shows you the results of the survey.

The “Stability” indicator shows how “still” the e-SYNC was when the survey was taken.

The buttons at the top of this screen allow you to save additional information for example: operator name, location, depth and any notes you would like kept with the survey results.

Next - ahead to the Survey Summary screen to give you a better idea of how this information is displayed.

Press the “Next” button

This brings you to:

Screen 15 – Survey Summary

This screen shows you a summary of all the survey information that will be stored and saved when you press the “Save” button.

Please Note: Once you press the “Save” button you will be no longer able to add or customize any information for that survey.

Press the “Save” button

This brings you to:

Screen 3 - Instrument Action Screen

You are now ready to take another survey if you choose.

top

1.       Turn on the e-SYNC.

2.       Turn on the handheld computer.

3.       Press: Start - File explorer - SD Card - Pajari - e-SYNC

Screen info: - Initializing . . .

4.       Press – “Start Advanced”

5.       Press – “System Settings”

6.       Choose - Single Shot Automatic 

7.       Press – “Adjust Timings”

8.       Press – “Change"

9.   Set required time before survey train is moving using the ‘+’ and ‘-’ buttons.

10.   Press – “Done” 3 times

11.   Press – “Wireless"  

12.  Press – “Start Survey”

Screen info:

·         Please wait

·         Performing Test

13.   Press – “Done”

14.   Press – “Start Survey”

Screen info:

·         Please wait . . .  

·         Instructing e-SYNC . . .

15.  The instrument is now active and will take a survey when it is stopped moving for 30 seconds.

16.   Press – “Download Survey”

Screen info:

·         Please wait . . .  

·         Downloading Surveys . . .

17.   Press – Next: - brings you to the “Survey Summary” Screen

18.   Press – Save: - now ready to take another survey